Jolly line 2167 Sun Visor 3 Multi - Multifrequency Remote Control

• Simultaneously press and hold in the A and B buttons of the Sun Visor 3 until the LED begins to flash
• Place the radioremotes at a distance of 2 cm face to face from each other and and press the key of the original radioremote to be duplicated until the led of Sun Visor 3 starts blinking quickly.
• While the led of Sun Visor 3 is blinking, press the key where you wany to program the key just acquired. Please repeat the previous procedure to program the remaining keys.

• Simultaneously press and hold in the A and B buttons of the Sun Visor 3 until the LED begins to flash.
• Place the radioremotes at a distance of 2 cm face to face from each other and press the key of the original radioremote to be duplicated until the led of Sun Visor 3 remains lit, release the key of the original one and wait until the led of Sun Visor 3 starts blinking.
• Transmit the source code of the original radioremote by pressing keys 1 and 2 together (in the previous models there is a key hidden under the hole on the back of the radioremore), the led starts blinking quickly; release the keys.
• While the led of Sun Visor 3 is blinking, press the key where you want to program the key just acquired; the led turns off.

• Simultaneously press and hold in the A and B buttons of the Sun Visor 3 until the LED begins to flash.
• Place the radioremotes at a distance of 2 cm face to face from each other and press the key of the original radioremote to be duplicated until the led of Sun Visor 3 remains lit; release the key of the original one and wait until the led of Sun Visor 3 starts blinking.
• Press keys 1 and 2 of the original radioremote until the led starts blinking; release the keys and press again the key of the original radioremote to be duplicated, the led of Sun Visor 3 begins to blink quickly, release the key.
• While the led of Sun Visor 3 is blinking, press the key where you want to program the key just acquired; the led turns off.

• Simultaneously press and hold in the A and B buttons of the Sun Visor 3 until the LED begins to flash.
• Place the radioremotes at a distance of 2 cm face to face from each other and press the key of the original radioremote to be duplicated until the led of Sun Visor 3 remains lit; release the key of the original one and wait until the led of Sun Visor 3 starts blinking.
• Press again the same key of the original radioremote, the led of Sun Visor 3 begins to blink quickly; release the key.
• While the led of Sun Visor 3 is blinking, press the key where you want to program the key just acquired; the led turns off.

• Place yourself near the original receiver.
• Simultaneously press and hold in the C and D butoons of the Sun Visor 3 until the LED turns off; release the keys.
• While the led is blinking quickly, press the programmed key.
• Wait for the led to stop blinking.

Feautures

• Frequency: Multifrequency
• Coding type: Rolling Code and Fixed Code
• Number of channels: 3 (with the possibility of storing 3 Different frequencies)
• Use: Gates, shutters, boxes, lighting, irrigation
• Programming: Self-learning
• Battery: 2 x 3 V - CR2032 (included)
• Scheduled as many times as you want
  
• Dimensions: L x W x H: 7 x 11 x 3 cm
• Weight: 0.100 Kg

The set contents

1 x Jolly line 2167 Sun Visor 3 Multi - Multifrequency Remote Control

2 x Batteries: 3 V - CR2032 (included)