We use cookies for this site to work properly. Due to EU legislation we have to ask for your consent.
By using our site you accept the terms of our Privacy Policy.

Tenda I-SWHUB TEG1105PD - 5 Port Gigabit Poe Switch PD

Tenda I-SWHUB TEG1105PD - 5 Port Gigabit Poe Switch PD Ethernet Switches Onetrade

Tenda I-SWHUB TEG1105PD

5 Port Gigabit Poe Switch PD


Featuring low cost, high performance and plug & play, the PoE switch TEG1105PD is both a PSE (Power Sourcing Equipment) and a PD (Powered Device), designed for such surveillance networking scenarios as roads in parks/communities, medium to large factories, and colleges. The switch provides four 10/100/1000 Mbps PoE OUT ports (ports 1 to 4) compliant with IEEE 802.3af and one 10/100/1000 Mbps PoE IN port (port 5) compliant with IEEE 802.3af/at. The maximum PoE output power of the whole switch is 30 W. The switch can supply power and transmit data to low-power APs and IP cameras through CAT5 cables. It is an ideal choice for wired networking in monitoring scenarios of middle to long distance.


Features of Gigabit Poe Switch

  • 5-port Gigabit PD PoE switch, with 4 PoE OUT ports (ports 1 to 4) and 1 PoE IN port (port 5); The switch can be powered via PSE-compliant IEEE 802.3af via port 5 via an Ethernet cable and provide power to low-power APs and IP cameras via ports 1 to 4
  • Gigabit speed without slowdown up to 200 meters, stable transmission
  • It does not require a dedicated and independent power supply, it is completely plug & play; 6KV lightning protection, always stable operation
  • Compact and portable, it can be easily installed in a waterproof box to be placed outdoors


    Features


    General information

    • Five 10/100/1000 Mbps ports
    • Port 5 supports power supply by a PSE compliant with IEEE 802.3af/at
    • Ports 1 - 4 support power supply to low-power PDs compliant with IEEE 802.3af
    • The switch supports auto MDI/MDIX, simplifing the network structure and maintenance. 
    • The non-blocking wire-speed forwarding function guarantees the smooth operation of network applications.
    • Full-duplex flow control and half-duplex back pressure control prevent frame loss caused by port blocking.
    • The switch supports the store-and-forward transfer mode and a 2 K MAC address table.
    • The switch supports 9K jumbo frame, improving the forwarding rate of large files.
    • The switch supports IP camera connection and guarantees the smoothness and clearness of monitoring videos. 


    Technical specifications

    • Network standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at
    • LED indicators: 1x Power LED Indicator, 4x PoE LED, 5x Link/Act LED Indicators
    • Interfaces: 4 10/100/1000 Base-T Ethernet Ports (data/PoEUT), 1 10/100/1000 Base-T Ethernet Port (data IN/PoE)
    • Recommended with CAT5/5e UTP cable or higher
    • 10Gbps switching capacity
    • Packet forwarding rate 7.44 Mpps
    • Buffer 1 Mb
    • 2K MAC Address Table
    • Jombo 9K frame
    • Single Port PoE Budget: AF: 15.4W

    Environmental characteristics

    • Operating temperature: 0 ~ 45°C
    • Storage temperature: -40 ~ 70°C
    • Operating Humidity: 10%~90% non-condensing
    • Storage humidity: 5%~90% non-condensing


    Certifications

    • THERE IS
    • FCC
    • RoHS


    The set contents


    1x Tenda I-SWHUB TEG1105PD - 5 Port Gigabit Poe Switch PD
    1x Instruction manual

    Write a review

    Note: HTML is not translated!
        Bad           Good

    • Product Code: 320038
    • Availability: Out Of Stock

    Tags: Tenda, Switches, POE