Why Evo Magnolia White - Fixed Code & Multifrequency Remote Control

Click Image for Gallery

Why Evo Magnolia White

Fixed Code & Multifrequency Remote Control

With Why Evo Magnolia White you can replace the function of remote controls from Gates, shutters, lighting, irrigation. You can program four channels or just one. Allows you to duplicate all fixed code remote controls on the frequency of 433.92MHz and remote controls with rolling frequency. Programming with Self-learning or with Why touch pro.

A) Programming:

-Easy programming with Why touch pro, a special tool for programming these types of remote controls.

B) Self-learning Programming:

-Fixed Code

While pressing the button 1 of the “WHY EVO”, at the same time press 4 times the 2 button.
Release both buttons. Now the WHY EVO RED LED emits a short flash every 2 seconds.
Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-3 cm of distance.
Press and retain pressed the button of the original remote control and wait for a change flash (as a faster flash) of WHY EVO RED LED and a change of its color (GREEN) that confirms the correct learning of code. This step may take a few seconds.
While the GREEN LED is flashing, press the button of the “WHY EVO” where you want to program the code just learnt, and retain pressed until the LED switches off. This step may take some seconds.
The copy has been happened with success. Now check on the automation the correct functioning of the new WHY EVO remote control

C) Self-learning Programming:

- Multifrequency Code for Simple remote controls

While pressing the button 1 of the “WHY EVO”, at the same time press 4 times the 2 button.
Release both buttons. Now the WHY EVO RED LED will emit a short flash every 2 seconds.
Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-2 cm of distance.
Press and retain pressed the button of the original remote control and wait for a change flash (as a faster flash) of WHY EVO RED LED and a change of its color (GREEN) that confirms the correct learning of code. This step may take a few seconds.
While the GREEN LED is flashing, press the button of the “WHY EVO” where you want to program the code just learnt, and retain pressed until the LED will switch off.
The copy has been happened with success.

- Multifrequency Code for BFT remote controls

While pressing the button 1 of the “WHY EVO”, at the same time press 4 times the 2 button.
Release both buttons. Now the WHY EVO RED LED will emit a short flash every 2 seconds.
Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-3 cm of distance (as shown in the picture).
Press and retain pressed the button to be programmed of the original remote control, till the RED LED will switch on as a fix light; now release the button.
The WHY EVO RED LED will emit a short flash every 2 seconds. That it informs the user that, to duplicate the remote control, it is necessary to emit the SEED CODE to realize the copy.
Transmit now the SEED CODE of the BFT original remote control, using a pin, press the rear hide button (see the picture) or, according to the new references, press the 1 and 2 buttons until the original remote control LED switches on. (see the picture)
Now the WHY EVO RED LED will change the flash mode (more fast) and a change of its color (GREEN), for a reconfirmation of the correct code learning. This step may take some seconds.
At this moment, press the WHY EVO button when you want to store the code and retain pressed until the WHY EVO LED switches off.

- Multifrequency Code for V2 remote controls

While pressing the button 1 of the “WHY EVO”, at the same time press 4 times the 2 button.
Release both buttons. Now the WHY EVO RED LED will emit a short flash every 2 seconds.
Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-3 cm of distance (as shown in the picture).
Press and retain pressed the button to be programmed of the original remote control, till the RED LED will switch on as a fix light; now release the button.
The WHY EVO LED will emit a short flash every 2 seconds. That it informs the user that, to duplicate the remote control, it is necessary to emit the SEED CODE to realize the copy.
Transmit now the SEED CODE of the V2 original remote control pressing at the same time 1 and 2 buttons.
Now the WHY EVO RED LED will change the flash mode (more fast) and a change of its color (GREEN), for a reconfirmation of the correct code learning. This step may take some seconds.
At this moment, press the WHY EVO button when you want to store the code and retain pressed until the WHY EVO LED switches off.

- Multifrequency Code for FAAC & GENIUS remote controls

While pressing the button 1 of the “WHY EVO”, at the same time press 4 times the 2 button.
Release both buttons. Now the WHY EVO RED LED will emit a short flash every 2 seconds.
Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-3 cm of distance.
Press and retain pressed the button to be programmed of the original remote control, till the LED will switch on as a fix light; now release the button.
The WHY EVO RED LED will emit a short flash every 2 seconds. That it informs the user that, to duplicate the remote control, it is necessary to emit the SEED CODE to realize the copy.
Predispose the FAAC/GENIUS remote control for the SEED CODE emission. Press at the same time the 1 and 2 buttons (note: THESE ARE THE BUTTONS OF THE DIAGONAL LINE as in the picture).
While FAAC/GENIUS remote control LED flashes, place it in front of WHY EVO at a distance of 1-3 cm and press the button to be programmed until the WHY EVO RED LED will change the flash mode (more fast) and a change of its color (GREEN), for a reconfirmation of the correct code learning. This step may take some seconds.
At this moment, press the button when you want to store the code and retain pressed until the WHY EVO GREEN LED, switches off.
The copy has been happened with success. Now check on the automation the correct functioning of new WHY EVO remote control pressing two times the copied button.

- Notes:

If the LED flashes only 3 times and switches off, the code has not learnt correctly. Please repeat the operation from the step 1.
The WHY EVO memory is completely re-writable.
To duplicate further buttons of WHY EVO, please repeat the operation from the step 1.

- Acquiring of the original central unit:

First of all you must be closed to the automation.
Press and retain pressed the programmed button during 10 seconds, when the LED start to flash, release the button.
Wait until the LED will turn off. The operation has been done, now you can use your new remote control.
For FAAC & GENIUS type remote controls simply press the programmed button 4 to 5 times.
For more brands of remote control check the manual.

Feautures

Coding type: Rolling Code and Fixed Code
Number of channels: 4
Use: Gates, shutters, boxes, lighting, irrigation
Programming: Self-learning or with WHY TOUCH PRO
Batteries: 3 V - CR2032 (included)
Metallic construction
Scheduled as many times as you want
Dimensions: L x W x H: 6.5 x 5 x 1.5 cm
Weight: 0.100 Kg

The set contents

1 x Why Evo Magnolia White - Fixed Code & Multifrequency Remote Control

1 x Battery: 3 V - CR2032 (included)

Product Code: 211276
Availability: Out Of Stock

Wishlist Compare

0 reviews / Write a review

Tags: Why Evo, Remote controls, Garage door