Anttron TMZ160HD - HDMI Modulator DVB-T/C

Anttron TMZ160HD - HDMI Modulator

HDMI to DVB-T/C modulator

In the Anttron TMZ160HD you can connect any HDMI device and watch it in HD up to 1080p. The channel produced appears in the digital terrestrial channel listing along with the other TV channels.    

Feautures of HDMI Modulator    

• 1 HDMI input, capable of receiving all resolutions up to 1080p.
• 1 RF input, to by-pass terrestrial signals.
• 1 RF output.
• Suitable for both domestic and commercial applications.
• OLED screen
• Joystick for setting parameters

Hardware installation

Connect the audio and video source using a HDMI cable. Connect the RF input cable (if present) and the RF output cable. If the RF input is not used, please connect a 75 ohm terminating resistor to it. Once the modulator installed and the cables connected, please proceed connecting the power supply to the modulator. 

Features

Video input: HDMI

Resolution modes: 480p -576p -720p - 1080i - 1080P

Compression: H.264 – bitrate 5-15 Mb/s

Audio input : HDMI

Sample Rate: HDMI (32kHz / 44.1 kHz / 48 kHz)

Compression: AAC-LC / MPEG1-L2– bitrate 128-384 Kb/s

DVB Processing

Table insertion: PAT, PMT, SDT, NIT

Configuration: Channel/network name, SID, LCN, TSID, ONID, NID, versions, audio, video PIDs…

DVB-T output

Output frequency / level: 170-230 MHz + 470-862 MHz / > 82 dBμV

Constellation - FEC: QPSK/16QAM/64QAM - 1/2, 2/3, 3/4, 5/6, 7/8

Guard interval: 1/4, 1/8, 1/16, 1/32

Mode - MER: 2K/8K - 31 dB

DVB-C output

Output frequency / level: 47-862 MHz / > 82 dBμV

Constellation - MER: QAM16,32,64,128,256 / MER > 40 dB

Power

DC 2.1 mm connector: +5V

Consumption: 4 Watts

The set contents

1x Anttron TMZ160HD - HDMI Modulator DVB-T/C

1x Power supply

1x Instruction Manual