Marmitek BoomBoom 55 - HD Bluetooth Audio Transmitter

Marmitek BoomBoom 55

HD Bluetooth Audio Transmitter

The Marmitek BoomBoom 55 is a Bluetooth audio transmitter that allows you to playback audio from any sound source through headphones or audio receivers that are equipped with Bluetooth technology. You can then control the audio using your sound source (e.g. TV) or audio receiver (Bluetooth headset). The BoomBoom 55 has a range of approx. 10 metres, enabling limitless enjoyment of your music in the same or adjoining room.

Feautures of Audio Tranmitter

• Get more from your Bluetooth headphones.
• Listen to TV audio on your Bluetooth headphones.
• Enjoy your favourite TV show or music, without bothering anyone.
• Features digital audio inputs and aptX® technology for a superior music experience.
• The best solution for listening to your TV: no noticeable lag between image and sound, thanks to the latest aptX Low Latency® technology*. 
• Unique ability to have 2 people use 2 headphones at the same time.

* For best results, the headphones should also feature aptX Low Latency® technology. Aptx Low Latency only works in single-mode.

How it works?

For best results, connect the BoomBoom 55 to the digital audio output (toslink or coaxial) of your TV or audio system. If your TV or audio system does not have a digital audio output, you can also connect the BoomBoom 55 to the analogue audio output or headphones-out. Both connection procedures are mentioned in the manual. Make sure your Bluetooth headphones are close to the BoomBoom 55. The best distance is about 1 metre. Put your Bluetooth headphones in pairing mode (please refer to your headphones' user manual). Set the BoomBoom 55's switch to ON and press the pairing button twice. The LED will now flash slowly. The BoomBoom 55 will now be automatically paired with your headphones. Once the pairing has been established, the blue LED on the BoomBoom 55 will light up continuously (this may take a while). 

Features

Input

DC Power via USB: 5V

Audio Input: 3.5mm stereo jack connector, Coax Digital, Toslink Digital

Connection: up to two Bluetooth devices (BT 3.0 or higher)

Supported Bluetooth profiles: A2DP

Supported Codec: SBC, aptX, aptX Low Latency (single-mode only)

Audio Latency: SBC, aptX, Up to 150 ms, aptX Low Latency, up to 40 ms 

Bluetooth version: Bluetooth 3.0 + EDR

Frequency response: 20~20 KHz (± 3 dB)

Channel Separation Audio R/L: ≧ 85 dB

SNR (nominal, Audio RL): ≧ 70 dB total harmonic distortion

DAC: DSP Co-Processor 16-bit Internal Stereo, CODEC with -95dB SNR

Sample rate: Up to 44,1 KHz

Range (free field): Up to 10 metres with Class 2 source

                                Up to 30 metres with Class 1 source

The set contents

1x Marmitek BoomBoom 55

1x Mini Jack audio cable.

1x Mini Jack to RCA audio cable

1x USB extension cable

1x Instruction Manual