Johansson 5600 Universe Pro 3

 Johansson 5600 Universe Pro 3

Universal Compact Headend

Johansson 5600 Universe Pro 3 is Universe Compact headend with 3 inputs (DVB-S2, DVB-T2 or DVB-C) / 3 IP out and 3 RF out (DVB-T or ISDB-T). This rackmountable Universal Compact Headend enables you to receive any transponder from satellite, terrestrial or cable and put it on your coaxial and IP network.

Feautures of universal compact headent

• receives 3 transponders from any DVB source (satellite, terrestrial or cable)
• decrypts the PayTV channels, when one or more professional CAMs are inserted
• puts the demodulated transponders on your private coaxial and IP network
• can work standalone to insert channels in your existing network
• compatible with SD and HD, with MPEG2 and MPEG4
• supports LCN
• perfect picture quality thanks to a MER, comparable to premium headend equipment
• Plug&Play thanks to a built-in WebGUI

Typical installation 

Figure 1: DVB-T AND DVB-S2 CONVERTED TO DVB-T AND IP CHANNELS

A: terrestrial antenna, B: satellite dishes, C: infinite IP clients (IP STBs, Computers or mobile devices with VLC, …), D: infinite DVB-T clients (DVB-T STBs, TV, …)

Figure 2: DVB-S2 CONVERTED TO DVB-T

B: satellite dish, D: infinite DVB-T clients

Features

Input

Inputs: 3

Tuners: 3

Frequency range:  42-2150 MHz

Level: -65 to -20 dBM

Standard: DVB-S/S2 | DVB-T/T2 | DVB-C

DC remote power for LNB or LNA: 0/13/18/22kHzDiSEqC, EN50494, EN50607 V, 350 mA

RF Output

Outputs: 1 RF with passive loop-through (-8 dB)

Multiplexes: 3

Frequency range: 174 - 862 MHz

Output level: -55 to -10 (adjustable) dBm

Standard: DVB-T | ISDB-T

Modulation error rate (MER): 40 dB

Ethernet Output

Outputs: 3 Gb Ethernet

Standard: IEEE 802.3ab 10/100/1000 Base-T

Protocol: Multicast IP/UDP

Transport stream: SPTS/MPTS*

General

CI slot: 3

Input voltage: 100-240, 50/60 Hz

Power consumption: 30 W (without CAM and without remote power)

Operating temperature: 0 to +50°C

The set contents

1 x 5600 Universe Pro 3

1 x Mains cable

3 x Ethernet cables

1 x 75 Ohm termination for the Bypass input (in case not used)

1 x Instruction Manual