Marmitek MegaView 141 UHD - HDMI extender and RC

Marmitek MegaView 141 UHD

HDMI extender over single CAT5e/6

The Marmitek MegaView 141 UHD provides a simple way to extend an HDMI or DVI signal over a single networking cable. Extend your HDMI cable up to 70 metres over a single networking cable! Enjoy the latest Ultra HD content and watch Netflix or a Blu-ray film in 4K elsewhere in the home, while maintaining ultimate contrast and beautiful colours.

All Marmitek products are manufactured with the utmost precision and are of high quality.

Feautures of hdmi extender

• Enjoy the latest Ultra HD content and watch Netflix or a Blu-ray film in 4K elsewhere in the home, while maintaining ultimate contrast and beautiful colours.
• Extend an HDMI cable up to 70 metres using a single CAT5e/CAT6 cable!
• Suitable for the latest Ultra HD 4K60 resolution (3840 x 2160 / 60Hz).
• Remotely operate a connected A/V device using the infrared return function or Consumer Electronics Control (CEC).
• Built-in Power over Cable (PoC) technology eliminates the need for a power socket for the receiver near the TV.
• Supports High Definition LPCM 7.1CH, Dolby TrueHD and DTS HD Master Audio.
• Supports HDCP 2.2 for playback of protected 4K Ultra HD content.

How it works?

Connect the HDMI source (Blu-ray disc player, TV Decoder, Media Centre PC, etc.) to the MegaView 141 UHD transmitter, using an HDMI cable (not provided). Connect the MegaView 141 UHD receiver to the appliance shown (e.g. HDTV or projector), using an HDMI cable (not provided). Use one CAT5e/6 Ethernet cable to connect the MegaView 141’s transmitter to the receiver. Attention! The MegaView 141 UHD cannot be connected to an existing home network (LAN), this may cause damage to the device. Finaly, connect the power adapter to the ‘12 VDC’ connector of the MegaView 141 UHD transmitter or receiver and plug the adapter into a socket.

Features

Video

Data transmission: HDBaseT

Video resolution: 4K(4096x2160)@60Hz and 1080p@60Hz

3D formats: 1080p@24Hz and 720p@60Hz

HDMI standard: HDMI 2.0b, CEC, EDID, DVI, all 3D formats and Deep Color 36-bit

HDCP standards: HDCP 2.2 and HDCP 1.4

Colour formats: RGB and YCbCr 4:2:0

Colour depth: 36-bit

Video bandwidth: 10.2 Gbps

Clock frequency: 340MHz

Audio

Audio formats: DTS-HD Master Audio, Dolby TrueHD, Dolby Digital/AC3, DTS 5.1 and PCM stereo

Trasmitter

AV input: 1 x HDMI input

UTP/CATx connection: RJ45, EIA/TIA T568B

Receiver

AV output: 1 x HDMI output

UTP/CATx connection: RJ45, EIA/TIA T568B

Length CAT5e/6 cable: Max. 40m@4K60Hz and 70m@1080p

HDMI cable length: max. 15 metres

RS232: Euroblock/Phoenix connector 

Infrared receiver

Frequency range: 30 - 60 kHz

Infrared reception range: ± 6 metres

Connection: 3.5mm jack plug

Cable length: 150 cm

Infrared extension cable with 1 blaster LED

Frequency range: 30 - 60 kHz

Infrared transmission range: ± 1 metres

Connection: 3.5mm jack plug

Cable length: 100 cm  

Power

Power supply: 100-240 VAC 50/60Hz, 5 VDC 1A

Power supply technology: Power over cable (POC)

The set contents

1xUltra HD transmitter (HMDI transmitter)

1x Ultra HD receiver (HDMI receiver)

1 x infrared receiver cable

1 x Infrared extension cable with 1 blaster LED

1x Power adaptor

1 x mounting material

1x User Manual