EDY DM-2 Led Dimmer 3-400watt /230vac

EDY DM-2 Led Dimmer

3-400watt /230vac

Recessed lighting dimmer for LED, 400 W Trailing Edge, 150 W LED Mode, with electronic protection against short circuit, overload and overheating. Intensity adjustment with a rotary potentiometer with a push-button ON/OFF, or remotely from a portable Button. Without neutral.  It has a rotary potentiometer for controlling the lighting, with a push-button ON-OFF. It also has a trimmer for adjusting the lower limit.Designed according to 2014/35/EU and 2014/30/EU directives and compliant with EN 60669-1 and EN 60669-2-1 standards, the EDY DM-2 ensures safety, reliability, and long-term performance.

Specifications

• Load power: 3W-400W
• Electronic protection : shortciruit, overload, overheating
• Operating Voltage: 230 VAC / 50Hz
• Maximum Humidity: 95%
• Operating temperature: -10οC to + 60οC
• Construction material: ABS frame
• Dimensions: 80x80x50 mm
• Colour : White
• Be careful not to use with Electromagnetic Transformers

Usage

The device has two operating modes (MODE): Trailing Edge Mode (default) and LED Mode.

Holding the switch down for more than 5 seconds changes the Dimmer Mode. The Mode is saved in the EEPROM memory so it is not lost when the power is cut off.

LED Mode is the best for LED operation, because in this mode the lamps never flicker. Some lamps do not work in this Mode.

It has a rotary potentiometer for its operation, to increase or decrease the lighting, with a pressed ON-OFF switch.

It also has a trimmer for adjusting the lower limit.

There is a possibility of remote adjustment with a button, from one or more points, as follows:

Momentary press, ON-OFF of the Dimmer.

Continuous press, increase or decrease the lighting intensity.

The direction of adjustment is reversed with each press of the BUTTON.

Package contents

1x EDY DM-2 Led Dimmer 3-400watt /230vac

1 x User Manual